Additional sensors for dashlogger

After my Greddy sandwich plate ended up FUBAR thanks to myself breaking off a NTP temp sensor in it I have only had oiltemp on the dash logger. I had to relocate the temp sensor to the oil draind plug and order a new pressure sensor that would fit in the stock location in the engine block.<div>I also ordered a bunch of 1/8-27 NTP temp sensors for intake, post turbo, coolant, transmission and diff. </div><div>I now have the following sensors up and working:</div><div>- Oil temp
- Oil pressure
- Intake temp
- Water temp</div><div>
</div><div>I have connected and routed the wiring for the post turbo/IC , trans and diff temp but need to get at set of new drain plugs and tap them for 1/8-27 NTP.  I’m not sure how to mount the post turbo temp.  I will not tap the pipe directly as the sensor will restrict flow if it sticks out too much.</div><div>When I’m going for a bigger turbo I’ll add an EGT probe.  The boost sensor will not be used as my E01 boost controller displays boost.</div><div>I’m looking forward to see the trans and diff temperatures.  Something tells me that the 6-speed is getting pretty hot after 10+ laps on the track.</div><div>
</div><div>Some pics:</div><div>
</div>

Comments

comments powered by Disqus